Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!gatech!hubcap!ncrcae!ncr-sd!bigbang!gryphon!pnet02!jdm
From: jdm@pnet02.CTS.COM (John Mesiavech)
Newsgroups: comp.sys.amiga
Subject: DropShodows & VT100
Message-ID: <517@gryphon.CTS.COM>
Date: Wed, 20-May-87 06:42:27 EDT
Article-I.D.: gryphon.517
Posted: Wed May 20 06:42:27 1987
Date-Received: Sat, 23-May-87 06:03:21 EDT
Sender: root@gryphon.CTS.COM
Organization: People-Net [pnet02], Redondo Beach, CA
Lines: 20

In message <who_cares> mwf@f.gp.cs.cmu.edu (Michael Whitbrock) writes:
>
>DropShadows is great, so is VT100.
>
> When using DropShadows with Vt100, a "took signal 400000000" gets sent to
>the screen, and to the host.  This is *nasty*
 
Michael, you right, it IS nasty.  It's also not a bug in VT100.
 
I use the COMM terminal program version 1.34, and I have the same problem
whilst using both DropShadow and Comm together.  It seems that DropShadows
uses something in the serial.device, and that this conflicts with any terminal
program using the device.  (It's happemed to me with other terminals as well
as Comm).
 
John


UUCP: {akgua!crash, hplabs!hp-sdd!crash}!gryphon!pnet02!jdm
INET: jdm@pnet02.CTS.COM