Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!husc6!mit-eddie!uw-beaver!tektronix!tekgen!tekigm2!phils
From: phils@tekigm2.TEK.COM (Philip E Staub)
Newsgroups: comp.sys.amiga
Subject: CMI KickStart Eliminator/ASDG RRD
Message-ID: <1794@tekigm2.TEK.COM>
Date: Fri, 22-May-87 14:32:03 EDT
Article-I.D.: tekigm2.1794
Posted: Fri May 22 14:32:03 1987
Date-Received: Sat, 23-May-87 18:17:34 EDT
Organization: Tektronix Inc., Beaverton, Or.
Lines: 23

---------------------------

I seem to have misplaced the documentation from Perry's RRD posting, so I'll
ask this question and risk a repeat posting (or maybe somebody can E-mail me
an answer).

I have both the RRD and the CMI kickstart eliminator, and would like to use
them both (at the same time). However, they both apparently want to have
their own entries as the first thing that gets done in the startup-sequence.
I.e., the RRD needs to be able to see if the ramdisk is active and/or has
any data in it, so it can refrain from re-initing itself, but the kickstart
eliminator ram needs to addmem the memory to the free list.

My question is: which do you do first? Sample startup-sequence excerpts
would be helpful.

thanks
Phil.
-- 
-------------------------------------------------------------------------------
Phil Staub              tektronix!tekigm!phils    (206) 253-5634
Tektronix, Inc., ISI Engineering
P.O.Box 3500, M/S C1-904, Vancouver, Washington w.  U