Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!daemon
From: RMF%ADMIN@UNCAEDU.BITnet
Newsgroups: comp.sys.amiga
Subject: Shell 205m
Message-ID: <2045@rutgers.rutgers.edu>
Date: Fri, 29-May-87 13:38:43 EDT
Article-I.D.: rutgers.2045
Posted: Fri May 29 13:38:43 1987
Date-Received: Sun, 31-May-87 06:44:10 EDT
Sender: daemon@rutgers.rutgers.edu
Lines: 26

From: RMF%ADMIN%UNCAEDU.BITNET@wiscvm.wisc.edu

        I recently installed the Insider!(tm) in my machine and have come
        across a weird qurk.  If I have AmigaD*s Run command in RAM
        and '$ run program' the program will start but I will be left
        at a NewCLI.  If I issue a EndCLI shell comes back.  If I
        leave Run on DF0: and '$ Run program' everything works fine.

        This is really odd.  Before I had extra ram, I always had
        Run and Execute in ram.  Does Run have a problem with fast
        ram?

        While I'm here, it seems odd to me that when you say help
        under Shell it says run is a valid command, usally this means
        its built into Shell, however Shell always requires the
        AmigaD*s Run command, sigh.

        /Russ
-----
Russell M Forster

DECnet: RMF @ { Admin | Comus | Stasis | Ins }
BITnet: RForster @ UncaEdu.BITnet
ARPA:   Oc.Russ @ CU20B.Columbia.Edu
USEnet: siesmo!calgary!vaxa!forster
-------