Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!mit-eddie!apollo!nazgul
From: nazgul@apollo.uucp (Kee Hinckley)
Newsgroups: comp.sys.apollo
Subject: Re: alternate Apollo VT100 fonts?
Message-ID: <34f0d5f5.b0a1@apollo.uucp>
Date: Mon, 18-May-87 16:40:00 EDT
Article-I.D.: apollo.34f0d5f5.b0a1
Posted: Mon May 18 16:40:00 1987
Date-Received: Tue, 19-May-87 04:44:03 EDT
References: <8705131747.AA12951@cod.nosc.mil>
Reply-To: nazgul@apollo.UUCP (Kee Hinckley)
Distribution: world
Organization: Apollo Computer, Chelmsford, MA
Lines: 15

In article <8705131747.AA12951@cod.nosc.mil> dennis@COD.NOSC.MIL (Dennis Cottel) writes:
> I would like to have the VT100 emulator use alternate fonts.  After I
> installed SR9.5, the VT100 uses a large font on a DN3000, but the (original)
> smaller font on a DN300.  A string dump of /sys/vtserver shows the string
> "~user_data/vt100_config" -- what can you configure?
> 
>        Dennis Cottel  Naval Ocean Systems Center, San Diego, CA  92152
>        (619) 225-2406     dennis@NOSC.MIL       sdcsvax!noscvax!dennis

I'm not sure what the config file does (although I'll check).  However you
may want to do what I did.  The vt100 simply uses a bunch of fonts in /sys/dm/fonts.
There are two sets, one large and one small, I simply made all the large ones
links to the small ones.

                                                    Kee Hinckley