Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!ames!ucbcad!ucbvax!MITRE-BEDFORD.ARPA!tom
From: tom@MITRE-BEDFORD.ARPA (McCarthy)
Newsgroups: comp.sys.apple
Subject: SOFTERM II FOR 128K IIe and IIc
Message-ID: <8705071854.AA07521@mitre-bedford.ARPA>
Date: Thu, 7-May-87 14:54:14 EDT
Article-I.D.: mitre-be.8705071854.AA07521
Posted: Thu May  7 14:54:14 1987
Date-Received: Sat, 9-May-87 09:46:56 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Distribution: world
Organization: The MITRE Corporation, Bedford, MA.
Lines: 23

Hi all:

I have a version of Softerm II that supposedly will run on the 128 IIe and on
a IIc.  It came with a plug in slot card for the IIe.  Supposedly there is a
plug in adapter for the IIc  that doesn't need a hardware card.  The program
can also use the "open apple" and "closed apple" keys for S1 and S2.  The
manual claims there is no keyboard mapping for S3.

I need S3 for a VT100 emulation (using a IIc), but I don't want to send
Softronics the $35.00 they want to ship me a "game port" switch I feel I
should have gotten anyway for the large sum of money I paid for this program.
If I get the switch, I have to send back the slot card and lose my Softerm II
capabilities on machines without 128K forever!!

Has anyone figured out how to map S3 on a IIc keyboard, so I don't have to
dump any more money into this program?  Any response will be much appreciated.


Thanks much.

Trevor O. McCarthy

MITRE  (tom@MITRE-BEDFORD.ARPA)