Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!sri-spam!mordor!styx!ptsfa!ihnp4!chinet!steinmetz!davidsen
From: davidsen@steinmetz.steinmetz.UUCP (William E. Davidsen Jr)
Newsgroups: comp.sys.att
Subject: Re: wanted info on 7300 disk drives
Message-ID: <5970@steinmetz.steinmetz.UUCP>
Date: Tue, 12-May-87 10:27:57 EDT
Article-I.D.: steinmet.5970
Posted: Tue May 12 10:27:57 1987
Date-Received: Sat, 16-May-87 02:30:25 EDT
References: <6485@mhuxu.UUCP>
Reply-To: davidsen@kbsvax.steinmetz.UUCP (William E. Davidsen Jr)
Organization: General Electric CRD, Schenectady, NY
Lines: 14
Keywords: 7300

In article <6485@mhuxu.UUCP> rs@mhuxu.UUCP (Bob Sanderman) writes:
>I need to increase the amount of disk space on my 7300.  I currently have

As far as I can tell you can use any disk with an ST506 interface. I have
used the 32MB half-height Tulin TU-340A (now discontinued), and tried
Seagates (80MB) and Priams (72MB). You can describe the format in terms
of tracks, etc, when you do the low level format. If you have a real power
hog you may have to use an external power supply.

-- 
bill davidsen			sixhub \	ARPA: wedu@ge-crd.arpa
      ihnp4!seismo!rochester!steinmetz ->  crdos1!davidsen
				chinet /
"Stupidity, like virtue, is its own reward"