Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!husc6!linus!gatech!gitpyr!jkg
From: jkg@gitpyr.gatech.EDU (Jim Greenlee)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Epson Equity II
Message-ID: <3663@gitpyr.gatech.EDU>
Date: Sat, 30-May-87 12:51:49 EDT
Article-I.D.: gitpyr.3663
Posted: Sat May 30 12:51:49 1987
Date-Received: Mon, 1-Jun-87 05:37:43 EDT
References: <391@gamma.UUCP>
Reply-To: jkg@gitpyr.UUCP (Jim Greenlee)
Organization: Georgia Institute of Technology
Lines: 21
Keywords: 8087-2

In article <391@gamma.UUCP> pfs@gamma.UUCP writes:
>I have gotten different stories as to whether the 8087-2 will
>work with the turbo speed mode for the V30 (7.16Mhz). Anyone
>out there have info as to whether the V30 will work the 8087-2?

I have an AT&T PC6300 with a V30 (8MHz) and an 8087-2 installed. I have 
used it mainly with the floating point library on my Modula-2 compiler,
which supports either software or hardware floating point operations. I
have never had any trouble with this combination. Unfortunately, the 
spreadsheet I have does not recognize whether an 8087 is installed, so
I have to "do it the hard way" (the main reason, BTW, that I got a V30
in the first place). Although I have access to Turbo Pascal with 8087
support, I've never tried it on my machine.

						Jim Greenlee

-- 
The Shadow...!{akgua,allegra,amd,hplabs,ihnp4,seismo,ut-ngp}!gatech!gitpyr!jkg

Jryy, abj lbh'ir tbar naq qbar vg! Whfg unq gb xrrc svqqyvat jvgu vg hagvy lbh
oebxr vg, qvqa'g lbh?!