Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!ames!amdcad!sun!aeras!grinch!luis
From: luis@grinch.UUCP (luis)
Newsgroups: comp.sys.ibm.pc
Subject: Hooking up 360k drives to AT.. Help!!
Message-ID: <238@grinch.grinch.UUCP>
Date: Sun, 31-May-87 02:19:38 EDT
Article-I.D.: grinch.238
Posted: Sun May 31 02:19:38 1987
Date-Received: Tue, 2-Jun-87 01:48:09 EDT
Organization: Textural Software, San Jose, Ca
Lines: 18
Keywords: help, AT, 360k

Hello fellow Net-er's out in netland..  Well, I just got myself an AT clone,
but can not seem to hook up 360k drives to it...  When I hookup my Teac 55-BV
drives to the AT, I can read just fine... But, writting..  forget it..  All
I get are errors when I try to format.. When I do a copy con:, everything
seems fine (i.e. drive light comes on, heads move), but when I do a DIR
nothing was added..  anyway, I have tried everything I can think of.. In
SET-UP, I have my drives chosen as 360k drives, NOT 1.2Mbyte drives..  It
seems to me a while back I heard something about cutting trace/pin 34 to
get 360's to work on AT's, and I have tried that as well.. But, it didn't
work either..  So, does anyone have any ideas?  Suggestions?  Please, let
me know via E-MAIL...  Thank you for your time...

-------------------------------------------------------------------------------
Luis Chanu                             "Live every day as if it were your last,
UUCP: ihnp4!sun!aeras!grinch!luis         because one day you will be right."
UUCP: lll-crg!vecpyr!wjvax!grinch!luis                             -Benny Hill
              Disk-Claimer: That's not your disk, that's my disk.
-------------------------------------------------------------------------------