Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!mit-eddie!uw-beaver!tikal!slovax!tron
From: tron@slovax.UUCP
Newsgroups: comp.sys.ibm.pc
Subject: CGA Card -> 'RF Modulator' -> Television
Message-ID: <448@slovax.UUCP>
Date: Tue, 2-Jun-87 14:38:31 EDT
Article-I.D.: slovax.448
Posted: Tue Jun  2 14:38:31 1987
Date-Received: Fri, 5-Jun-87 02:06:51 EDT
Organization: R & D Associates., Tacoma, WA
Lines: 27


	Question about the ibm "CGA COLOR GRAPHICS" card. I have a cga card
	and also have a mono graphics card.  The mono card will not run
	any of the 'cga required' software (ie games). Can I use a color
	Television as a cga monitor? If so, how do get the card to emulate
	an 'RF Modulator' signal so the TV will receive the signal?

	The card has a composite signal phono-jack in the back. Will the
	card as it exists produce a 'RF' signal with some jumper settings?

	Can a composite to RF signal translator be created through hardware
	means?

	Thanks in advance to anyone that will respond to my question.
-- 
         
            
  

David Barker     		trwrb ----\
RDA Logicon      		psivax ---|-!logico--\
Tacoma Wa  USA   		ism780c --/           \
                               		               -!slovax!tron
                 		hplsla ---\           /
                 		fluke ----|-!tikal---/
                 		uw-beaver /