Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!ames!ucbcad!ucbvax!decvax!tektronix!tekgen!tekigm2!phils
From: phils@tekigm2.UUCP
Newsgroups: comp.sys.m68k
Subject: Re: Recent Motorola ad seen in Byte
Message-ID: <1766@tekigm2.TEK.COM>
Date: Fri, 15-May-87 16:49:40 EDT
Article-I.D.: tekigm2.1766
Posted: Fri May 15 16:49:40 1987
Date-Received: Sat, 16-May-87 17:20:49 EDT
References: <8705130713.AA24919@cory.Berkeley.EDU>
Reply-To: phils@tekigm2.UUCP (Philip E Staub)
Organization: Tektronix, Inc., Beaverton, OR.
Lines: 27

In article <8705130713.AA24919@cory.Berkeley.EDU> dillon@CORY.BERKELEY.EDU (Matt Dillon) writes:
::A minor point.  According to "M68000 16/32-Bit Microprocessor", Programmer's
::Reference Manual, Fourth Edition, page 218, Table G-1:
::	asl.l	#1,D1
:           ^
::is not listed as a loopable instruction.
::
::allen
:	
:	According to table G-1, ASL certainly IS a loopable instruction.
:Re-read your manual.... it's in the second column.  Furthermore, instruction
:cycle times for ASL in loop mode are given on page 212, table F-13.
:
:	No apology necessary.
:
:				-Matt

	ASL is loopable only in the 'word' flavor. Allen indicated 'long'

				-Phil


-- 
-------------------------------------------------------------------------------
Phil Staub              tektronix!tekigm!phils    (206) 253-5634
Tektronix, Inc., ISI Engineering
P.O.Box 3500, M/S C1-904, Vancouver, Washington  98668