Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!im4u!oakhill!davet
From: davet@oakhill.UUCP
Newsgroups: comp.sys.m68k
Subject: Re: Z80 to MC68000
Message-ID: <884@oakhill.UUCP>
Date: Sun, 17-May-87 01:02:21 EDT
Article-I.D.: oakhill.884
Posted: Sun May 17 01:02:21 1987
Date-Received: Sun, 17-May-87 09:00:20 EDT
References: <323@ncroem.UUCP>
Reply-To: davet@oakhill.UUCP (Dave Trissel)
Organization: Motorola Inc. Austin, Tx
Lines: 10
Keywords: Z80,translator

In article <323@ncroem.UUCP> peter@ncroem.UUCP (Peter S. Greis) writes:
>Is anyone aware of a translator to convert z80 code to m68k code?
>please replay by email.

I wrote one a couple of years ago in Motorola Pascal.  Each Field Application
Engineer at the local sales offices can order a copy from their support
headquarters in Phoenix.  It is shipped in EXORmacs disk text format.
Note also that I used Motorola Pascal string functions in the source.

 -- David Trissel Motorola, Austin {siesmo,ihnp4}!ut-sally!im4u!oakhill!davet