Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!mimsy!oddjob!gargoyle!ihnp4!upba!dsndata!denny
From: denny@dsndata.UUCP (Denny Page)
Newsgroups: comp.sys.m68k
Subject: Re: Recent Motorola ad seen in Byte
Message-ID: <107@dsndata.UUCP>
Date: Sun, 17-May-87 23:45:18 EDT
Article-I.D.: dsndata.107
Posted: Sun May 17 23:45:18 1987
Date-Received: Tue, 19-May-87 05:42:20 EDT
References: <362@sbcs.UUCP> <125900004@infoswx>
Organization: Design Data, Lincoln, NE
Lines: 12
In-reply-to: cramer@infoswx.UUCP's message of 15 May 87 12:22:00 GMT



Edition five of Motorola's reference manual does mention asl as a loopable
instruction.  However, the only applicable size and addressing modes listed
are as follows:

	asl.w	#1,(a1)

All shift/rotate instructions are listed with the same mode restrictions.

-- 

Denny	dsndata!denny		[Martha, the Clones are loose again!]