Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!ames!ucbcad!ucbvax!NGP.UTEXAS.EDU!mknox
From: mknox@NGP.UTEXAS.EDU.UUCP
Newsgroups: comp.sys.m68k.pc
Subject: Re:  HELP!
Message-ID: <8705210317.AA14260@ngp.utexas.edu>
Date: Wed, 20-May-87 23:17:53 EDT
Article-I.D.: ngp.8705210317.AA14260
Posted: Wed May 20 23:17:53 1987
Date-Received: Sat, 23-May-87 01:26:21 EDT
Sender: mwm@ucbvax.BERKELEY.EDU
Distribution: world
Organization: The ARPA Internet
Lines: 18
Approved: info-68k@ucbvax.berkeley.edu

There are a lot of systems running CP/M-68K, by a LOT of vendors.
Unfortunately, this means no ONE vendor has a major commitment
to the system.

The TANDY (Radio Shack) line has a fair number of CP/M-68K
installations.  This is the Model-16, Model-6000, or the -II
or -12 with 68000 upgrade.  Nice thing about this system is
that you can run both CP/M-2.2 (or CP/M-Plus) and CP/M-68K
all intermixed.

SAGE (STRIDE?) and ERG all made CP/M-68K systems.  SAGE had
a multi-user version (ran multiple copies of the OS).  Motorola
has a VME-based version.

Then there are a lot of little single-board or add-in card
systems running it.  HSC and Peak come to mind.  Lots of
people have done their own, buying the generic version and
writing the BIOS (about as easy as a 2.2 BIOS).