Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!columbia!rutgers!ames!amdcad!amd!mikep
From: mikep@amd.UUCP (mike parker)
Newsgroups: comp.sys.mac
Subject: Re: Transparency film for the Apple LaserWriter
Message-ID: <3969@amd.UUCP>
Date: Fri, 8-May-87 17:54:12 EDT
Article-I.D.: amd.3969
Posted: Fri May  8 17:54:12 1987
Date-Received: Sun, 10-May-87 01:00:44 EDT
References: <930@water.UUCP>
Reply-To: mikep@amd.UUCP (mike parker)
Organization: Advanced Micro Devices
Lines: 19

In article <930@water.UUCP> phcalamai@water.UUCP (Paul H. Calamai) writes:
>
>Could  someone out there please recommend a brand of
>transparency film for use with the Apple LaserWriter Plus.

I am using Kodak Ektaprint transparency material, cat #151 4793.
It seems to work, but sometimes won't feed, this is usually fixed by
turning it over, there isn't any readily apparent front.

Discalaimer: just because it works for me doesn't maen it will for
you, I take no responsibility if Kodak ETM dmages your laserwriter.

Mike

-- 
 UUCP: {hplabs,amdcad,ihnp4,allegra}!amd!mikep
 ARPA: amdcad!amd!mikep@decwrl.dec.com
 USPS: Mike Parker, AMD, P.O. Box 3843, M.S. 6, Sunnyvale, Ca. 94088
 AT&T: 408-370-6743