Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!ll-xn!husc6!endor!olson
From: olson@endor.harvard.edu (Eric Olson)
Newsgroups: comp.sys.mac
Subject: Re: nonstandard baud rates
Message-ID: <1973@husc6.UUCP>
Date: Wed, 13-May-87 10:25:57 EDT
Article-I.D.: husc6.1973
Posted: Wed May 13 10:25:57 1987
Date-Received: Sat, 16-May-87 02:47:39 EDT
References: <6183@dartvax.UUCP>
Sender: news@husc6.UUCP
Reply-To: olson@endor.UUCP (Eric Olson)
Organization: Aiken Computation Lab Harvard, Cambridge, MA
Lines: 13

In article <6183@dartvax.UUCP> steveh@dartvax.UUCP (Steve Heimlich) writes:
>I'm sure this has been discussed here before, so could someone
>please mail me a summary (or some source) of programming the
>SCC for non-standard baud rates, like 31.25K.  Thanks,
>Steve

Sounds like you're trying to get the MIDI baud rate.  Just thought I'd mention
that I recall the best approximation to the MIDI rate on the Mac's SCC is a
bit off, because of the clock/counter/divider setup in the hardware.  Thus
the profusion of MIDI adapters for the Macintosh, which provide an accurate
clock as an external clock to the SCC.

-Eric