Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!ima!mirror!datacube!berger
From: berger@datacube.UUCP
Newsgroups: comp.sys.mac
Subject: Hyperdrive 20 and System 4.1
Message-ID: <105800006@datacube>
Date: Mon, 25-May-87 13:59:00 EDT
Article-I.D.: datacube.105800006
Posted: Mon May 25 13:59:00 1987
Date-Received: Wed, 27-May-87 01:36:10 EDT
Lines: 17
Nf-ID: #N:datacube:105800006:000:776
Nf-From: datacube.UUCP!berger    May 25 13:59:00 1987


Has anyone who has  a hyperdrive  20 internal  disk, tried installing
Mac System 4.1?  I just recieved Mac System tools  2.0 which includes
system 4.1 and Finder 5.5.  If I install it in  my hyperdrive startup
drawer  or  I  build  a  floppy  with  System  4.1  that  has had the
Hyperinstall process done, I can not open  the starup  drawer or boot
from the hard disk.  System 4.0 works fine by the way...

I'm running an updated Mac+ and had my  hyperdrive controller updated
about a month ago when I had my Mac 512 updated to a Mac+.  

				Bob Berger 

Datacube Inc. Systems / Software Group	4 Dearborn Rd. Peabody, Ma 01960
VOICE:	617-535-6644;	FAX: (617) 535-5643;  TWX: (710) 347-0125
UUCP:	ihnp4!datacube!berger
	{seismo,cbosgd,cuae2,mit-eddie}!mirror!datacube!berger