Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!ames!cit-vax!oberon!sdcrdcf!ism780c!tim
From: tim@ism780c.UUCP
Newsgroups: comp.sys.mac
Subject: RAMSDClose() vs. Modem
Message-ID: <6458@ism780c.UUCP>
Date: Mon, 1-Jun-87 17:27:42 EDT
Article-I.D.: ism780c.6458
Posted: Mon Jun  1 17:27:42 1987
Date-Received: Thu, 4-Jun-87 01:20:06 EDT
Reply-To: tim@ism780c.UUCP (Tim Smith)
Organization: Interactive Systems Corp., Santa Monica CA
Lines: 16

I am attempting to use the modem port on my Mac+ from LightspeedC.

I open the driver with RAMSDOpen(), set parameters with SerReset(),
set it up to ignore hardware handshaking with whatever the call that
does that is ( SerHShk() ? ), and do my IO with PBRead() and PBWrite().

All of this seems to work.  However, when I finish and do RAMSDClose(),
it hangs.  The RAMSDClose() does not return until I cycle power on
the modem.

How do I get it to not do this?
-- 
Tim Smith			"Froh wie seine Sonnen fliegen
sdcrdcf!ism780c!tim		 Durch des Himmels praecht'gen Plan,
				 Laufet, Brueder, eure Bahn,
				 Freudig wie ein Held zum Siegen"