Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!husc6!bu-cs!halleys!ulowell!hawk!lavallee
From: lavallee@hawk.UUCP
Newsgroups: comp.sys.tandy
Subject: Re: TERMCAP for Tandy-1000/DESKMATE wanted
Message-ID: <1259@ulowell.cs.ulowell.edu>
Date: Thu, 7-May-87 14:50:31 EDT
Article-I.D.: ulowell.1259
Posted: Thu May  7 14:50:31 1987
Date-Received: Sat, 9-May-87 06:22:13 EDT
References: <1264@ogcvax.UUCP>
Sender: nobody@ulowell.cs.ulowell.edu
Reply-To: lavallee@hawk.CS.Ulowell.Edu (Warren J. Lavallee)
Organization: University of Lowell
Lines: 20
Keywords: dialup terminal, termcap
Summary: A maybe solution


	I suggested this to a customer once, and he said it worked. 

BOOT the machine with a line in the config.sys file that says

DEVICE=ANSI.SYS

And then you have type "ansi" terminal that then system understands.

If that doesn't work, and you ahve 256K or more memory I would suggest
ProComm.  You may use this on a trial basis to decide whether you want
to register or not and use it.  The full details are in the document that
come with it.  You can download it from there board at (314) 449-9401.

						- Warren Lavallee
						lavallss@hawk.CS.Ulowell.Edu
						lavallee@ulowell.UUCP

[And of course, these views do not necessarily represent the views of 
the University of Lowell, or Tandy/Radio Shack.]