Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!gatech!hao!nbires!isis!udenva!rabtrs!rab
From: rab@rabtrs.UUCP
Newsgroups: comp.sys.tandy
Subject: Re: Is SCSI availible for the 16?
Message-ID: <148@rabtrs>
Date: Fri, 8-May-87 10:23:46 EDT
Article-I.D.: rabtrs.148
Posted: Fri May  8 10:23:46 1987
Date-Received: Sun, 10-May-87 05:33:57 EDT
References: <5928@shemp.UCLA.EDU>
Organization: CG&S, Littleton, CO
Lines: 30

> Is it possible to get a SCSI interface for the 16? (NOT 6000, a 16). I just
> freed up a slot with a one meg upgrade, and want something that I can
> do significant expanding. So,
> A. Is there a SCSI board, and
> B. Does it support all the features of SCSI (in particular, sharing a device
>    among several processors.)
> 				Michael Gersten

Contact Bob Snapp at 513-891-4496.

He has taken the SCSI Board that Tandy sells to drive their Disk Cartridge
System (aka Bernoulli box) and is running VERY large SCSI disk drives.

It should run on a 16 or 6000 as long as you have the slot and are running
XENIX-68000 03.01.xx.

Bob is an old friend, please mention my name.

Rich
---
"Adversity is the crucible from which greatness is forged." - Ken Baker
   ____       ____         ___
  / _  \     / _  \       / _ \         Richard A. Bilancia
 / / \_/    / / \_/   _   \ \\/         Computer Guidance & Support
/ /        / /  _    | |   \ \          P. O. Box 620127
\ \   _    \ \ | \  | + |   \ \         Littleton, Colorado  80162
 \ \_/ \    \ \_| \  |_|  /\_| \        voice: (303) 973-4035
  \____/     \____/       \____/
                                        ihnp4!sys1!bilanc!rab
 Multi-User Accounting Solutions	attmail!bilanc!rab