Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!ut-sally!husc6!cmcl2!brl-adm!adm!Mensing.Henr@Xerox.COM
From: Mensing.Henr@Xerox.COM (Dave)
Newsgroups: comp.unix.questions
Subject: 3B2 & Hayes Modem
Message-ID: <7438@brl-adm.ARPA>
Date: Mon, 18-May-87 16:49:28 EDT
Article-I.D.: brl-adm.7438
Posted: Mon May 18 16:49:28 1987
Date-Received: Tue, 19-May-87 04:48:49 EDT
Sender: news@brl-adm.ARPA
Lines: 16

Has anyone connected a Hayes Smartmodem 1200 to an AT&T 3B2? If so I
would greatly appreciate hearing exactly how you did this. 

I am especially interested in the following information:
 - Dip switch settings in the modem
 - Cable pin-outs
 - Which files were needed
 - Direction of modem traffic (inbound, outbound, bidirectional)
 - Any other notes or caveats

Thanks,
	Dave Mensing

ARPA:	mensing.henr@xerox.com
UUCP:	ihnp4!hplabs!parcvax!mensing
PHONE: 716-427-6423