Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!mnetor!seismo!husc6!rutgers!lll-lcc!styx!ptsfa!vixie!paul From: paul@vixie.UUCP (Paul Vixie Esq) Newsgroups: comp.unix.wizards Subject: Re: dr11w "driver" Message-ID: <619@vixie.UUCP> Date: Wed, 6-May-87 20:39:31 EDT Article-I.D.: vixie.619 Posted: Wed May 6 20:39:31 1987 Date-Received: Sat, 9-May-87 01:38:14 EDT References: <253@wapsyvax.OZ> Reply-To: paul@vixie.UUCP (Paul Vixie Esq) Organization: Vixie Enterprises, San Francisco Lines: 36 I answer this question below, but first let me ask a related question: Does anyone have or know of a driver for the DR11W that will let you speak TCP/IP between Vaxen that each have the card? I know it can be done, because VMS/DECNet can do it. I just need the driver... In article <253@wapsyvax.OZ> doug@wapsyvax.OZ (Doug Robb) writes: >Has anyone got a "driver" for this card? I realize that people like >to say that there is no such thing as a dr11 driver (because it depends on >what hangs off the dr11) A DR-11W on a QBUS? A similar device, maybe, but the exact same name as the UNIBUS card? That seems foolish on DEC's part, if so. I have a driver for this card, meant to control an Ungermann-Bass MVC box. MVC's are hard to find anymore, and the driver moved from src/sys/vaxuba to src/old in the 4.2 -> 4.3 upgrade... If someone in this group will verify that the source is PD, perhaps someone can mail it to you (me, even). >is how to control the dr11 and pass information back and forth. >How to ioctl through it? >This should be common to most (all?) people who have a dr11. >After doing this knocking up the driver for whatever device you have hanging >off it should be staightforward. In may case its a digital filter/frame store. >If somebody has such a beast would they be kind enough to >contact/send it to me? Thanks in anticipation. -- Paul A. Vixie {ptsfa, crash, winfree}!vixie!paul 329 Noe Street dual!ptsfa!vixie!paul@ucbvax.Berkeley.EDU San Francisco CA 94116 paul@vixie.UUCP (415) 864-7013