Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!clyde!cbatt!cwruecmp!hal!ncoast!miket
From: miket@ncoast.UUCP (Michael Taht)
Newsgroups: comp.unix.xenix
Subject: Re: XENIX driver wanted
Message-ID: <2505@ncoast.UUCP>
Date: Thu, 14-May-87 13:08:32 EDT
Article-I.D.: ncoast.2505
Posted: Thu May 14 13:08:32 1987
Date-Received: Sun, 17-May-87 01:27:45 EDT
References: <1652@nicmad.UUCP>
Reply-To: miket@ncoast.UUCP (Michael Taht)
Distribution: world
Organization: Cleveland Public Access UN*X, Cleveland, Oh
Lines: 8

With a smart board using Z80's you're gonna have to know Z80 assembly
language. Unless you already know it, or your time is worthless to you,
don't bother. You can get a dumb Digiboard for around 300. (4 port)
If you're familiar with Z80, getting the device driver to work should'nt
be too much trouble.......................... It would help to have
VERY complete specs on your board.

Michael taht (Tot)