Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!cbmvax!grr
From: grr@cbmvax.UUCP
Newsgroups: sci.electronics
Subject: Re: Minimal transmitter/receiver setup
Message-ID: <1935@cbmvax.cbmvax.cbm.UUCP>
Date: Wed, 27-May-87 05:42:02 EDT
Article-I.D.: cbmvax.1935
Posted: Wed May 27 05:42:02 1987
Date-Received: Thu, 28-May-87 06:40:03 EDT
References: <6414@reed.UUCP>
Reply-To: grr@cbmvax.UUCP (George Robbins)
Organization: Commodore Technology, West Chester, PA
Lines: 16

In article <6414@reed.UUCP> shadow@reed.UUCP (Matthew Giger) writes:
> 
> Does anybody out there have any ideas on how to create a minimalist
> radio transmitter and receiver setup.  A simple pulse signal transmitter
> and a receiver to activate a relay.  Any help would be appreciated.
> 
>	Matt Giger		tektronix!reed!shadow

Last time I looked, Radio Shack was still selling a little radio/control
transmitter/receiver pair for a reasonable price.  Unless you need quantity,
that's probably the way to go.  Transmitters are easy, receivers not so much.

-- 
George Robbins - now working for,	uucp: {ihnp4|seismo|rutgers}!cbmvax!grr
but no way officially representing	arpa: cbmvax!grr@seismo.css.GOV
Commodore, Engineering Department	fone: 215-431-9255 (only by moonlite)