Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!ames!ptsfa!pbhye!josh
From: josh@pbhye.UUCP (Joshua Stein)
Newsgroups: comp.graphics,comp.unix.wizards
Subject: Horizontal format with pic or Postscript?
Message-ID: <1642@pbhye.UUCP>
Date: Tue, 9-Jun-87 14:53:31 EDT
Article-I.D.: pbhye.1642
Posted: Tue Jun  9 14:53:31 1987
Date-Received: Fri, 12-Jun-87 04:17:08 EDT
Organization: Pacific * Bell, San Ramon, CA
Lines: 15
Keywords: pic Postscript
Xref: mnetor comp.graphics:747 comp.unix.wizards:2667

I am working on a Sun workstation using the IDE package for software design and have run into a little problem. A data flow diagram that is visually ok on the
screen becomes compressed when printed on a laser printer. The diagram is wide
and I am at a loss as to how to tell either pic (if this possible) or Postscript(the two available graphics packages) how to rotate the diagram and print it
horizontally (actually the laser printer would take care of the printing if I
could just get the generated bit map correct). Also, if anyone who knows some-
thing of how to scale drawings in those packages I would certainly appreciate
some advice.

Much of the above is probably copyrighted so please apply the usual disclaimers
at this point.
-- 
							   __
Joshua Stein	Pacific Bell		"Neat Stuff!!"	 / --) koo koo ka choo
YADD(Yet Another Disclaimer Disclaimer)		        /\ ) )
(415) 823-2411 uucp:{ihnp4,dual}!ptsfa!ptsfb!josh      |   \/ rn].