Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!mit-eddie!uw-beaver!tektronix!tekgen!tekigm2!timothym
From: timothym@tekigm2.TEK.COM (Timothy D Margeson)
Newsgroups: comp.lang.pascal
Subject: Re: Turbo Pascal Help Needed!!
Message-ID: <1887@tekigm2.TEK.COM>
Date: Fri, 26-Jun-87 13:09:40 EDT
Article-I.D.: tekigm2.1887
Posted: Fri Jun 26 13:09:40 1987
Date-Received: Sat, 27-Jun-87 11:51:35 EDT
References: <1071@tekfdi.TEK.COM>
Reply-To: timothym@tekigm2.UUCP (Timothy D Margeson)
Organization: Tektronix, Inc., Beaverton, OR.
Lines: 31

In article <1071@tekfdi.TEK.COM> donp@tekfdi.UUCP (Don Primrose) writes:
>I recently aquired a CP/M board with Turbo Pascal ver. 3.01a
>Unfortunatly with no instructions. I figured out how to use the editor
>and save the source code but I don't know how to save an executable.
>Can someone please help me?
>Thanks,
>Don

Okay, this may sound hokey, but....

So you got this system for a price, and did not receive the manuals? Okay, I'll
buy that. Now, to use the compiler to it's fullest, you WILL need the manual.

My recommendation? Go buy a copy of IBM PC Turbo Pascal, the manual is the same
and should answer ALL of your questions.

Other wise, you'll find yourself asking one heck of alot more questions than
you will get answers for.

In the mean time, the command to compile to disk is OCQC. It should have been
self evident by trying all of the available menus, but since you didn't figure
this out, I REALLY RECOMMEND you buy a manual.....


Good luck! 

-- 
Tim Margeson (206)253-5240
PO Box 3500  d/s C1-937                          @@   'Who said that?'  
Vancouver, WA. 98668
{amd..hplabs}cae780!tektronix!tekigm2!timothym (this changes daily)