Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!utgpu!water!watmath!clyde!rutgers!ames!amdcad!cae780!tektronix!reed!psu-cs!nelsons From: nelsons@psu-cs.UUCP Newsgroups: talk.bizarre,comp.misc Subject: Re: What the world needs now Message-ID: <420@psu-cs.UUCP> Date: Thu, 4-Jun-87 17:48:51 EDT Article-I.D.: psu-cs.420 Posted: Thu Jun 4 17:48:51 1987 Date-Received: Sat, 6-Jun-87 06:55:19 EDT References: <12067@topaz.rutgers.edu> <408@rlvd.UUCP> <557@xn.LL.MIT.EDU> Reply-To: nelsons@psu-cs.UUCP (Shannon Nelson) Followup-To: comp.misc Distribution: na Organization: Dept. of Computer Science, Portland State University; Portland OR Lines: 31 Xref: utgpu talk.bizarre:1982 comp.misc:598 Summary: Reset buttons are useful... In article <557@xn.LL.MIT.EDU> kathy@XN.LL.MIT.EDU (Kathryn Smith) writes: > [ ... ] The >AT&T 3B series of Unix machines have NO power switch. The shutdown mechanisms >are all software-controlled. There is a "on/off" switch on the side of the >machine, but all it does is invoke the software. The only way to force it down >if the software hangs (and it does occasionally) is to go over to the wall >outlet and pull the plug. [ ... ] > >-------------------------------------------------------------------------------- >Kathryn L. Smith UUCP: ...ll-xn!kathy >MIT Lincoln Laboratories ARPANET: kathy@XN.LL.MIT.EDU >Lexington, MA PHONE: (617) 863-5500 ext. 816-2211 > > "I didn't do it, and I can justify it all anyway." >-------------------------------------------------------------------------------- Actually, it's probably better to use the little reset button on the upper right hand corner of the back to get the machine's attention. This will work very nicely with the silly little 3b2's. (It's no wonder that AT$T *gave* so many away!) Shannon -- /======\ Shannon Nelson // \\ \\ ...tektronix!psu-cs!nelsons (( go\\to )) \\ \\ // "Keyboard. How quaint." \======/