Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!husc6!mit-eddie!genrad!decvax!ucbvax!MCC.COM!CP.PAVER
From: CP.PAVER@MCC.COM (Bob Paver)
Newsgroups: comp.os.vms
Subject: Re: TeX 2.0 driver for QMS 800 on VMS
Message-ID: <12310463454.52.CP.PAVER@MCC.COM>
Date: Sun, 14-Jun-87 12:35:26 EDT
Article-I.D.: MCC.12310463454.52.CP.PAVER
Posted: Sun Jun 14 12:35:26 1987
Date-Received: Sun, 21-Jun-87 06:00:42 EDT
References: <"PSI%SNMSN1::PSI%DSAVX1::JAMET%sdr.slb.com"@RELAY.CS.NET>
Sender: daemon@ucbvax.BERKELEY.EDU
Distribution: world
Organization: The ARPA Internet
Lines: 19

I'm not a specialist with the TeX QMS driver so this is a wild guess.

Is it possible that the file RESIDENT.FNT is not readable because of
file protections or some other reason.  DVILG8 has to read it when
it converts the DVI file to QUIC.  If it can't find it for whatever
reason, that could be causing your problem.

Good luck.  If you want, I can probably give you the names of people
at Texas A & M University where the QMS support was written.

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Bob Paver	(512) 338-3316
Microelectronics and Computer Technology Corp. (MCC)
3500 West Balcones Center Drive
Austin, TX  78759

ARPA:  paver@mcc.com
UUCP:  {ihnp4,seismo,harvard,gatech}!ut-sally!im4u!milano!paver
-------