Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!cbosgd!ucbvax!CS.UCLA.EDU!cpd
From: cpd@CS.UCLA.EDU.UUCP
Newsgroups: comp.protocols.appletalk
Subject: Telnet and screen size
Message-ID: <8706081702.AA29408@hera.CS.UCLA.EDU>
Date: Mon, 8-Jun-87 13:02:46 EDT
Article-I.D.: hera.8706081702.AA29408
Posted: Mon Jun  8 13:02:46 1987
Date-Received: Wed, 10-Jun-87 05:07:03 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Distribution: world
Organization: The ARPA Internet
Lines: 32

I just got KIP and CAP working.  For those of you still trying, 
the 'atalk.local' I used was

# mynet mynode myzone
1.1 16 HAIC
# bridgenet bridgenode bridgeIP
2.1 220 192.5.224.127


with a FastPath2.  Note that I had to use 220 for the node number, as
indicated by the Prompt program, not 200 as some people have reported.
The 'atalkatab' I used is,

1.1 H	192.5.224.127 HAIC # This is the address of the ethernet side
2.1 KC	192.5.224.127 HAIC # this is the address of the appletalk side
    I1192.5.224.127 L0
    L0 L0
    L0 L0 L0 L0 S0 S0
    LX0  S0 S10
    S2.1 S1.1 "AT"

with this setup I was able to get 'look' and 'lwpr' to work, but not
'efsd'.  After starting 'atis', waiting, and starting 'efsd', I could
not see the efs deamon with look.

One more thing, after bringing up KIP, and running the new,
'Telnet 3/87(KIP0287)[1]', I only got about 8 lines of screen
from emacs, vi, and more. Anybody else have this problem?

Thanks
-Charlie Dolan
cpd@hera.cs.ucla.edu