Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!mtune!codas!novavax!hcx1!johnk
From: johnk@hcx1.SSD.HARRIS.COM
Newsgroups: comp.protocols.misc
Subject: Re: Spec for MAP & TOP
Message-ID: <119400001@hcx1>
Date: Tue, 9-Jun-87 11:00:00 EDT
Article-I.D.: hcx1.119400001
Posted: Tue Jun  9 11:00:00 1987
Date-Received: Sat, 20-Jun-87 03:45:14 EDT
References: <71@teletron.UUCP>
Lines: 43
Nf-ID: #R:teletron.UUCP:71:hcx1:119400001:000:1152
Nf-From: hcx1.SSD.HARRIS.COM!johnk    Jun  9 11:00:00 1987


Re: MAP and TOP specs:

Here's some address that should help you out:

For MAP info and specs:

General Motors Corporation
Manufacturing Engineering and Development
Advanced Product and Manufacturing Engineering Staff (APMES),
APMES A/MD - 39
GM Technical Center
Warren, MI  48090-9040

For TOP info and specs:

Boeing Computer Services
Network Services Group
P.O. Box 24346, M/S 7C-16
Seattle, WA  98124-0346

If these are not the most current, at least they will be able
to point you in the right direction.
Another handy source is the Society of Manufacturing Engineers,
who are coordinating the MAP/TOP Users' Group:

Manufacturing Automation Protocol & Technical and Office Protocol
Users Group of SME
One SME Drive
P.O. Box 930
Dearborn, MI  48121

Phone (313) 271-1500

If I have more time in the next few days, maybe I'll post what
I know about these protocols (there seems to be a huge lack
of knowledge out there about MAP and TOP).

-----------------------------------------------------------------
John J. Krawczyk                 UUCP: johnk@hcx1.ssd.harris.com
Harris Computer Systems
2101 W. Cypress Creek Road
Ft. Lauderdale, FL  33309