Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!cbosgd!ihnp4!ptsfa!ames!cit-vax!elroy!jplpro!grieggs
From: grieggs@jplpro.UUCP
Newsgroups: comp.sources.d
Subject: Re: Atari ST terminal emulation (was Re: when using termcap, get it right!)
Message-ID: <232@jplpro.JPL.NASA.GOV>
Date: Thu, 4-Jun-87 15:03:24 EDT
Article-I.D.: jplpro.232
Posted: Thu Jun  4 15:03:24 1987
Date-Received: Sat, 6-Jun-87 10:37:38 EDT
References: <1149@carthage.swatsun.UUCP> <8601@tekecs.TEK.COM>
Reply-To: grieggs@jplpro.UUCP (John T. Grieggs)
Organization: Jet Propulsion Laboratory, Pasadena CA.
Lines: 22

In article <144@netxcom.UUCP> rkolker@netxcom.UUCP (rich kolker) writes:
>I've been meaning to ask this.  After I bring up Uniterm on my 1040
>with a Volksmodem, how do I get it to dial?

Assumption: Volksmodem uses something resembling Hayes dial command.

if (assumption == TRUE) {
	type ATDT986797687 or whatever your number is;
	wait for connect;
} else {
	dunno, will have to look at Volksmanual
}

Also, once you have your dial string set up, you can program it into a function
key. I seem to recall saving mine with my most freqently used numbers in
ATDT function key strings, with +++ on F9 and ATH^m on F10.

-- 
John T. Grieggs (Telos @Jet Propulsion Laboratory)
4800 Oak Grove Drive, Pasadena, Ca. 91109 M/S 301-260A    (818) 354-0465
Uucp: {cit-vax,elroy,chas2}!jplpro!grieggs
Arpa: ...jplpro!grieggs@cit-vax.ARPA