Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!ames!sdcsvax!ucbvax!OZ.AI.MIT.EDU!OAF.G.PELLER
From: OAF.G.PELLER@OZ.AI.MIT.EDU.UUCP
Newsgroups: comp.sys.apple
Subject: GS upgrade questions
Message-ID: <8706060959.aa02361@SMOKE.BRL.ARPA>
Date: Fri, 5-Jun-87 21:11:04 EDT
Article-I.D.: SMOKE.8706060959.aa02361
Posted: Fri Jun  5 21:11:04 1987
Date-Received: Sun, 7-Jun-87 04:55:56 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Distribution: world
Organization: The ARPA Internet
Lines: 22

Message-ID: <12308198025.18.OAF.G.PELLER@OZ.AI.MIT.EDU>

OK, so I got a good offer for my Apple //e, monitor, and 2 drives, and i've
decided to buy a //gs (via Apple for the teacher deal... very cheap.  In
fact, it works out cheaper to buy a new computer than to upgrade)

Anyways, I just wanted to make sure that all my existing hardware
will work with the //gs.  I have:

   An epson MX-80 printer hooked up through a grappler plus card
   A Prometheus Promodem 1200a
   A II+ joystick (old 16 pin)

That's about it... I'm selling everything else.  So, will this
hardware work?  Will programs like Ascii Express and Mousetalk
work?

Thanks for your help.

Adam Peller
ADAMP%OZ@MC.LCS.MIT.EDU
-------