Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!sri-spam!ames!sdcsvax!ucbvax!hp-sdd.UUCP!mdavis
From: mdavis@hp-sdd.UUCP (Morgan Davis)
Newsgroups: comp.sys.apple
Subject: Re: RE:gs modem port fix
Message-ID: <8706020746.AA13305@crash.CTS.COM>
Date: Tue, 2-Jun-87 01:39:13 EDT
Article-I.D.: crash.8706020746.AA13305
Posted: Tue Jun  2 01:39:13 1987
Date-Received: Sun, 7-Jun-87 05:11:31 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Reply-To: hp-sdd!pnet01!pro-sol!mdavis@AMSAA.arpa
Distribution: world
Organization: The ARPA Internet
Lines: 14

You can change the baud rate, as was stated earlier, on a IIGS by typing:

        ]IN#2
        <ctrl-A><T>                             <-- terminal mode
        <cktl-A><6><B>                          <-- set 1200 bps (10B is 2400)
        ....                                    <-- do whatever you need to
        <ctrl-A><Q>                             <-- quit terminal mode
        ]IN#0

This works.

UUCP: [ ihnp4 akgua hplabs!hp-sdd sdcsvax nosc ] !crash!pnet01!pro-sol!mdavis
ARPA: crash!pnet01!pro-sol!mdavis@nosc
INET: mdavis@pro-sol.CTS.COM