Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!husc6!mit-eddie!ll-xn!ames!sdcsvax!ucsdhub!hp-sdd!hplabs!ucbvax!UCONNVM.BITNET!SEWALL
From: SEWALL@UCONNVM.BITNET
Newsgroups: comp.sys.apple
Subject: Kermit 3.75 setting permanent parameters
Message-ID: <8706221741.aa00321@SMOKE.BRL.ARPA>
Date: Mon, 22-Jun-87 03:40:00 EDT
Article-I.D.: SMOKE.8706221741.aa00321
Posted: Mon Jun 22 03:40:00 1987
Date-Received: Sat, 27-Jun-87 05:25:58 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Distribution: world
Organization: The ARPA Internet
Lines: 14

1) Do an 80 column CATALOG and write down the A$ and L$ numbers for
the KERMIT program.

2) Run Kermit and set your parms.

3) Exit Kermit

4) BSAVE KERMIT,A$####,L$####

I haven't used KERMIT in ProDOS, and ProDOS may be nasty enough
not to let you quit into an environment where you can BSAVE memory.
In that case, you may have to copy to the program to DOS 3.3, BRUN,
set your parms, BSAVE, and copy back to ProDOS (that's not only ugly,
it won't let you preset a PREFIX).