Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!ames!hao!husc6!seismo!mcvax!unido!rmi!hikaru
From: hikaru@rmi.UUCP
Newsgroups: comp.sys.atari.st
Subject: Problems with PD UUCICO!? - (nf)
Message-ID: <8000006@rmi.UUCP>
Date: Mon, 8-Jun-87 10:47:00 EDT
Article-I.D.: rmi.8000006
Posted: Mon Jun  8 10:47:00 1987
Date-Received: Sun, 14-Jun-87 19:45:04 EDT
Lines: 31
Nf-ID: #N:rmi:8000006:000:1150
Nf-From: rmi!hikaru    Jun  8 15:47:00 1987


I have used the PD uucico program for about two days, and have encountered
the following problems.
(Not necessarily bugs in the program but rather 'operator stupidity'. If
so, please let me know.)

SLAVE Mode:
The modem initialisation string and the login sequence is sent to the 
screen and not to the RS-232 port.

MASTER Mode:
1. When the program is started with "uucico -r1", it prints a line for
   every system in l.sys and 'says' NO WORK, even though I have created
   work files with names according to the docs. 
   (ex.: crmi678 for the remote system rmi, or caltg954 for the remote
    system altger. Are these names correct, or what filenames have to be
    used?)

2. When the program is started with "uucico -r1 -ssysname", it calls the
   remote system specified, gets past login and Shere=sysname, sends some
   characters, and then hangs up.
   The uucico debugfile (PROTO) shows the following:
       startup (master): 1st msg = 'Shere=altger'
       startup (master): 2nd msg = RLOGIN
       MAIN:          state = O__
   ...

   uulog on the remote UNIX system (Sys V) says: 
   "FAILED (BAD LOGIN/MACHINE NAME)"

Ideas anyone?