Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!husc6!necntc!ames!amdahl!drivax!holloway
From: holloway@drivax.UUCP (Bruce Holloway)
Newsgroups: comp.sys.atari.st
Subject: Re: Problems with PD UUCICO!? - (nf)
Message-ID: <1880@drivax.UUCP>
Date: Tue, 16-Jun-87 16:40:50 EDT
Article-I.D.: drivax.1880
Posted: Tue Jun 16 16:40:50 1987
Date-Received: Mon, 22-Jun-87 06:26:00 EDT
References: <8000006@rmi.UUCP>
Reply-To: holloway@drivax.UUCP (Bruce Holloway)
Organization: Digitalis Research, Inc.
Lines: 24

In article <8000006@rmi.UUCP> hikaru@rmi.UUCP writes:

>MASTER Mode:
>1. When the program is started with "uucico -r1", it prints a line for
>   every system in l.sys and 'says' NO WORK, even though I have created
>   work files with names according to the docs. 

I found the same thing. I haven't tried taking all the sample files, and
just replacing the names with the ones appropriate to my site, but that
might be something.

>2. When the program is started with "uucico -r1 -ssysname", it calls the
>   remote system specified, gets past login and Shere=sysname, sends some
>   characters, and then hangs up.

Hmmm... this worked for me. I sent mail to myself (anything!me) from drivax,
then went home, ran UUCICO -r1 -sdrivax, and (after a bit of a delay - why?)
UUCICO called up DRI, transferred the files, then hung up. No problems.

The UUCP login I used has UUCICO in slave mode as the shell. But if it comes
up with Shere=, then you probably have that right, too.

Eagerly awaiting the source and bug fixes,
Bruce