Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!utgpu!water!watmath!clyde!rutgers!mtune!mtunb!dmt From: dmt@mtunb.UUCP Newsgroups: comp.sys.att Subject: Re: Keyboard problem (how to maintain)? Message-ID: <970@mtunb.ATT.COM> Date: Fri, 19-Jun-87 08:57:36 EDT Article-I.D.: mtunb.970 Posted: Fri Jun 19 08:57:36 1987 Date-Received: Sat, 20-Jun-87 07:19:26 EDT References: <3914@jade.BERKELEY.EDU> Reply-To: dmt@mtunb.UUCP (Dave Tutelman) Organization: AT&T Information Systems - Lincroft, NJ Lines: 29 Summary: ...with a small screwdriver. In article <3914@jade.BERKELEY.EDU> mic@lapis.berkeley.edu(Michel Bruneau) writes: >The 's' key on my keyboard is almost dying (it need more attentive touching >than the rest of the keys in order to print). Now I know that AT&T keyboards >are not worth a piece of -hit, but still, I wish to know how to repair >myself this little inconvinience (a technicien servicing would >cost more than the price of a new keyboard). (In the description that follows, consider the keyboard to be lying flat in front of you, with you facing north. "Up" means away from the earth, "north" means away from you.) Use a small screwdriver to remove the key, as follows. There are two small plastic tabs that lock the key to the keyboard, north and south of the key; the one to the north is easier to see, but the other is just like it. Use the screwdriver to press the tabs in, and slide the key up and out. Clean out the dust and oxidation where the key contact hits the keyboard contact, then snap the key back in. I've had to do this to about one or two keys a year with my AT&T keyboard. Well worth it for a comfortable and fairly well laid-out keyboard. (That's the 302; I share your opinion of the 301, though cleaning works the same way.) +---------------------------------------------------------------+ | Dave Tutelman | | Physical - AT&T - Lincroft, NJ | | Logical - ...ihnp4!mtuxo!mtunb!dmt | | Audible - (201) 576 2442 | +---------------------------------------------------------------+