Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!utgpu!water!watmath!clyde!rutgers!gatech!hubcap!ncrcae!ncr-sd!hp-sdd!hplabs!sdcrdcf!burdvax!psuvax1!jte From: jte@psuvax1.UUCP Newsgroups: comp.sys.att Subject: Re: Gnu-Emacs port to Unix PC? Message-ID: <2582@psuvax1.UUCP> Date: Thu, 18-Jun-87 12:14:28 EDT Article-I.D.: psuvax1.2582 Posted: Thu Jun 18 12:14:28 1987 Date-Received: Sat, 20-Jun-87 07:31:08 EDT References: <1362@super.upenn.edu.upenn.edu> Reply-To: jte@psuvax1.psu.edu.UUCP (Jon Eckhardt) Distribution: world Organization: Penn State University, University Park, PA Lines: 18 Keywords: gnu-emacs unixpc Hello, I am having a large problem and I have finally decided to ask the professionals of USENET for a bit of help. I have a AT&T 3B2/300 running System V 3.0. I am trying to connect it to a univeristy wide terminal switcher here know as the IDX (cisco). The problem that I have is that anyone can connect to our machine from the IDX with no problem at all, use the system and then log off. The problem is that the swithcer does not drop the connection and then leave the line free for the next user because the 3b2 does not drop DTR on pin 20. Does anyone know how I can get the 3b2 to drop DTR on pin 20? Does anyone elese out there have their 3b2's in a setup like this? Thanks for any info or help you can give me. --Jon jte@psuvax1.BITNET Phone: 814-237-1901 Work: (leave message) 814-865-9505 jte@psuvax1.psu.edu.ARPA !psuvax1!jte