Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!cbmvax!phillip
From: phillip@cbmvax.cbm.UUCP (Phillip Lindsay CATS)
Newsgroups: comp.sys.ibm.pc
Subject: Re: DOS 3.30 and DRIVPARMS?????
Message-ID: <1990@cbmvax.cbmvax.cbm.UUCP>
Date: Tue, 9-Jun-87 10:38:53 EDT
Article-I.D.: cbmvax.1990
Posted: Tue Jun  9 10:38:53 1987
Date-Received: Fri, 12-Jun-87 04:19:46 EDT
References: <1704@nicmad.UUCP>
Organization: Commodore Technology, West Chester, PA
Lines: 27

in article <1704@nicmad.UUCP>, brown@nicmad.UUCP (Mr. Video) says:
> 
> In article <7000002@fthood> egray@fthood.UUCP writes:
> <
> <I'm having trouble getting DOS 3.30 to load the 3.5" floppy device driver
> <for my IBM clone (a Toshiba T1100+ w/ 2ea 3.5" drives).  The new block
> <device driver file DRIVER.SYS will only set EXTERNAL drives, not internal.
> <For example, if my CONFIG.SYS contained:
> <
> <	DEVICE=DRIVER.SYS /D:0 /F:2
> <	DEVICE=DRIVER.SYS /D:1 /F:2
> <
> <A reboot would setup devices D: and E: ....  NOT A: and B:
>
I thought the driver took next "open" slot since MSDOS already sees two
drives out there.
Instead of "DEVICE" spec. in the config.sys file I do this under MSDOS3.2: 
	
	DRIVPARM=/D:0 /F:2
	DRIVPARM=/D:1 /F:2

When MSDOS boots my unit 0 and 1 drives default to 720k (31/2) drives.
==============================================================================
	Phillip (Flip) Lindsay - Commodore Business Machines
  UUCP: {ihnp4|seismo|caip}!cbmvax!phillip      - Phone: (215) 431-9180
  No warranty is implied or otherwise given in the form of suggestion or 
  example. Any opinions found here are of my making.