Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!sri-spam!ames!ucbcad!ucbvax!decvax!tektronix!tekgen!tekigm2!timothym
From: timothym@tekigm2.UUCP
Newsgroups: comp.sys.ibm.pc
Subject: Re: Lost clusters, chains, and files
Message-ID: <1849@tekigm2.TEK.COM>
Date: Wed, 10-Jun-87 14:27:36 EDT
Article-I.D.: tekigm2.1849
Posted: Wed Jun 10 14:27:36 1987
Date-Received: Sat, 13-Jun-87 06:43:09 EDT
References: <1855@isis.UUCP>
Reply-To: timothym@tekigm2.UUCP (Timothy D Margeson)
Organization: Tektronix, Inc., Beaverton, OR.
Lines: 16

In short, yes.

You can recover lost chains and clusters by the following method:

CHKDSK X: /f

Then if you want to save the chains as files, answer yes to the prompt you're
given. Otherwise CHKDSK will erase the chain, and free up the disk space.



-- 
Tim Margeson (206)253-5240
PO Box 3500  d/s C1-937                          @@   'Who said that?'  
Vancouver, WA. 98668
{amd..hplabs}cae780!tektronix!tekigm2!timothym (this changes daily)