Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!mit-eddie!think!ames!oliveb!dragon
From: dragon@oliveb.UUCP
Newsgroups: comp.sys.ibm.pc
Subject: Re: Installing DOS 3.3 on 20 MB hard di
Message-ID: <1404@oliveb.UUCP>
Date: Mon, 15-Jun-87 11:47:19 EDT
Article-I.D.: oliveb.1404
Posted: Mon Jun 15 11:47:19 1987
Date-Received: Wed, 17-Jun-87 01:23:29 EDT
References: <1232@crash.CTS.COM>
Organization: Dragon Technology, Inc. San Francisco, USA
Lines: 17

in article <1232@crash.CTS.COM>, msmiley@pnet01.CTS.COM (Matt Smiley) says:
> 
> I've just *attempted* to get a 70 megabyte hard disk going in a Deskpro with
> PC DOS 3.3. It partitions the thing just fine (33.5 megs in logical drives C:
> and D: and roughly 5 more in E:) but will *not* boot. If you're thinking of
> shelling out for 3.3 for that reason alone... DON'T! I was told to try
> VFEATURE by Golden Bow Systems.

I also went through the same problem with an AT clone and a Seagate ST251,
it boots fine all versions of DOS from the floppy, but once I FDISKed it
with 3.30, no more boot from the hard disk.  At least I kept my 3.2...


-- 
MANNERS:  Just say no _t_h_a_n_k _y_o_u!

Dragon Technology!!       {hplabs,ames,sun,etc.}!oliveb!olivej!dragon