Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!seismo!uunet!iscuva!randyg
From: randyg@iscuva.UUCP
Newsgroups: comp.sys.ibm.pc
Subject: Re: PC to PC transfer software
Message-ID: <549@iscuva.ISCS.COM>
Date: Sat, 20-Jun-87 00:57:16 EDT
Article-I.D.: iscuva.549
Posted: Sat Jun 20 00:57:16 1987
Date-Received: Sun, 21-Jun-87 01:04:43 EDT
References: <303@m2c.UUCP>
Reply-To: randyg@iscuva.UUCP (Randy Gordon)
Distribution: na
Organization: ISC Systems Corporation, Spokane, WA
Lines: 17
Keywords: pc, serial_port
Summary: Why pay for what you can get for free?

In article <303@m2c.UUCP> paul@m2c.UUCP (Paul B. Cohen) writes:
>
>Does anyone have any experience with "Brooklyn Bridge", a pc to pc tranfer
>program using the serial port? (Useful for laptops to normal pc's where the
>disks are different sizes.)
>
>Comments on that, or other recommendations of others would be appreciated.
>
>Paul Cohen
>cohen@m2c.org

Just set up Procomm on both the machines (downloadable from almost any bulletin
board in the civilized world (AND the Pacific Northwest), and set it for 
direct connect in the host mode option. I transfer stuff between a NEC APC IV
and a ISC WPIII that way all the time.

Randy Gordon (Tao ku tse fun pee)