Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!columbia!rutgers!sri-unix!sri-spam!ames!ucbcad!ucbvax!hplabs!hp-pcd!hpcvc0!shreeve
From: shreeve@hpcvc0.HP (Bob Shreeve)
Newsgroups: comp.sys.ibm.pc
Subject: 30MB Hard Disk Problem
Message-ID: <4490004@hpcvc0.HP>
Date: Wed, 17-Jun-87 12:38:03 EDT
Article-I.D.: hpcvc0.4490004
Posted: Wed Jun 17 12:38:03 1987
Date-Received: Sun, 21-Jun-87 14:14:58 EDT
Organization: Hewlett-Packard Co., Corvallis, Oregon
Lines: 13


 
I have been having problems with my 30MB hard disk.  Once the system has warmed up for 20 to 30 minutes the disk works fine.  However, before this period
the disk boots but typically has read errors reading files from the disk (
including command files!).  The disk is a 30MB Seagate 238 and the controller
is an Adaptec 2070A.  If the system is power cycled after the 20 minute warm
up period everything works fine.  Therefore it seems the problem is heat
related.  Has anyone else had this problem?  Any solutions?  
Thanks for your help. 

Bob Shreeve  HP NID
(503) 750-2975
hp-labs!hp-pcd!shreeve