Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!ut-sally!husc6!think!ames!ptsfa!ihnp4!twitch!homxb!shah1
From: shah1@homxb.UUCP (J.SHAH)
Newsgroups: comp.sys.ibm.pc
Subject: Posting Clockdev.sys for AT&T 6300 Computers
Message-ID: <390@homxb.UUCP>
Date: Mon, 22-Jun-87 13:52:16 EDT
Article-I.D.: homxb.390
Posted: Mon Jun 22 13:52:16 1987
Date-Received: Tue, 23-Jun-87 07:34:38 EDT
Distribution: world
Organization: AT&T Bell Laboratories, Holmdel
Lines: 20
Summary: AT&T-PC 6300, Clock & Calendar, DOS

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  
Here is the uuencoded version of the clock program needed
to set the clock and calendar correctly on an AT&T PC 6300
running under IBM PC-DOS 3.x
Just include device=clockdev.sys on your config.sys file
and boot the machine.
              
begin 644 clockdev.sys
M_____PB &  C $-,3T-+)" @      $ +HP&%  NB1X2 ,M64%%25QX&4R[%
M'A( BD<"Q'\.#A\*P'4#Z8  / QW(#P#<B%T$#P$=$T\"'(7="@\"70D=P\S
MP"[%'A( B4<2N .!ZP*T 2[%'A( B4<#6P<?7UI96%[+)HL%,]*[M07W\RZC
M%@"+VB:*;0,FBDT"M/_-&OOKSK3^S1I2N+4%+O<F%@!: ]@FB1TFB&T#)HA-
: B:(=04FB%4$ZZDNQ1X2 ,='#K\ C$\0ZYH%
 
end

 
Disclaimer: I got this program from a bulletin board and AT&T Bell Laboratories
has no knowledge of this program. I am responsible for posting it to the net.