Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!cbmvax!vu-vlsi!sword
From: sword@vu-vlsi.UUCP (Ronin)
Newsgroups: comp.sys.ibm.pc
Subject: 1101 Diagnostics Error: the answer
Message-ID: <923@vu-vlsi.UUCP>
Date: Thu, 25-Jun-87 01:06:41 EDT
Article-I.D.: vu-vlsi.923
Posted: Thu Jun 25 01:06:41 1987
Date-Received: Sat, 27-Jun-87 01:54:12 EDT
Organization: Villanova Univ. EE Dept.
Lines: 20
Keywords: solution, unplug cable

My thanks to those who responded to my question about an
1101 Diagnostics Error, on my P.C. especially: brian@chemo,
ghynes@garfield, ralf@b.gp.cs.cmu.edu and smith@ui3.

The answer was to unplug the modem cable from the RS-232 port
and then run diagnostics.  Everything checks out fine after
this.  This also explains why it is was not caught before,
because I usually only do diagnostics after moving the computer,
and the modem is disconnected during the move.

Thanks again to those who replied.

..lar
-----
Larry Esmonde, Director of SWORD (Students Working On R & D)
Computer Science Dept.
Villanova University
Villanova Pa., 19085

UUCP: {cbmvax,bpa,psuvax1}!vu-vlsi!sword    BITNET: sword@vuvaxcom