Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!uwvax!astroatc!nicmad!brown
From: brown@nicmad.UUCP (Mr. Video)
Newsgroups: comp.sys.ibm.pc
Subject: Re: CONFIG.SYS
Message-ID: <1736@nicmad.UUCP>
Date: Mon, 29-Jun-87 11:01:23 EDT
Article-I.D.: nicmad.1736
Posted: Mon Jun 29 11:01:23 1987
Date-Received: Wed, 1-Jul-87 02:01:51 EDT
References: <2362@uwmcsd1.UUCP>
Reply-To: brown@nicmad.UUCP (Mr. Video)
Distribution: na
Organization: Mr. Video's Hangout
Lines: 20

In article <2362@uwmcsd1.UUCP> dpeter@csd4.milw.wisc.edu (Peter J Diaz de Leon) writes:
<I have created a config.sys file on my system, and one of the commands in it is
<SET LISP%LIB=C:\UTIL

SET commands are to be done within a .BAT file, in your case AUTOEXEC.BAT.
SET is not a CONFIG.SYS option.

<However when I issue the SET command at the C> prompt is shows me 
<LISPLIB=C:\UTIL
<
<Where did the % go.
<
<But if I issue SET LISP%LIB=C:\UTIL at the C> prompt it works fine.

From within a .BAT file, use %% to get a single %.
-- 
	 harvard-\     ihnp4--\
Mr. Video   seismo!uwvax.......!nicmad!brown
	 rutgers-/    decvax--/
		    terminus-/