Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!sri-spam!mordor!lll-tis!ames!ucbcad!ucbvax!math.waterloo.EDU!jimomura%lsuc
From: jimomura%lsuc@math.waterloo.EDU
Newsgroups: comp.sys.m68k.pc
Subject: (none)
Message-ID: <8707030632.AA13635@ucbvax.Berkeley.EDU>
Date: Mon, 29-Jun-87 04:17:37 EDT
Article-I.D.: ucbvax.8707030632.AA13635
Posted: Mon Jun 29 04:17:37 1987
Date-Received: Sat, 4-Jul-87 11:18:15 EDT
Sender: mwm@ucbvax.BERKELEY.EDU
Distribution: world
Organization: The ARPA Internet
Lines: 55
Approved: info-68k@ucbvax.berkeley.edu

To: 
Path: lsuc!jimomura
From: jimomura@lsuc.UUCP (Jim Omura)
Newsgroups: comp.sys.m68k.pc
Subject: Re: hard disk tool needed for os-9
Summary: Crude fix available
Message-ID: <1896@lsuc.UUCP>
Date: 29 Jun 87 01:47:47 GMT
References: <870625@<PEPRBV> <123100001@datacube>
Reply-To: jimomura@lsuc.UUCP (Jim Omura)
Distribution: world
Organization: Consultant, Toronto
Lines: 40


In article <123100001@datacube> berger@datacube.UUCP writes:
>
>
>This should be considered a bug. There should be a way to enter the
>manufactures defect list into the format utility. There should also
>be a place on the disk where it could be recorded in a machine readable
>form.
>				Bob Berger 
>


     Actually this matter came up
before on BIX and the current fix
is to go in and manually adjust the
FAT.  Kim Kempf posted a quicky
program to help with this.  Frankly
I'm speaking from memory and I can't
remember what the tool did.  I
*think* it simply edited the FAT
entries as you specified.  I can't
even remember if you had to do any
manual calculations in terms of
track and sector or whether it did
that much for you.

     Being Kim's work, I can't post
it to the Net without his permission.
Actually, he's often on the Net, so
I assumed that he might do it himself.
Unfortunately, I believe he's on a
holiday for the next week.  I'll try
to remember to ask him about it when
he gets back.  No promises though.
Best to ask him yourself.

Cheers! -- Jim O.
-- 
Jim Omura, 2A King George's Drive, Toronto, (416) 652-3880
ihnp4!utzoo!lsuc!jimomura
Byte Information eXchange: jimomura