Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!im4u!swrinde!petro!ssbn!bill
From: bill@ssbn.UUCP (Bill Kennedy)
Newsgroups: comp.sys.ibm.pc,comp.sys.misc
Subject: Zenith 150 upgrade to AT comp.
Message-ID: <305@ssbn.UUCP>
Date: Mon, 8-Jun-87 17:15:56 EDT
Article-I.D.: ssbn.305
Posted: Mon Jun  8 17:15:56 1987
Date-Received: Thu, 11-Jun-87 06:33:54 EDT
Distribution: na
Organization: W.L. Kennedy Jr. & Associates, Pipe Creek, TX
Lines: 15
Keywords: Zenith AT 80286
Xref: mnetor comp.sys.ibm.pc:4720 comp.sys.misc:623

I have a Zenith model 161 luggable XT workalike.  It is identical to the
model 150 but luggable.  It has three oversize cards for the CPU/keyboard,
video(CGA), and floppy/serial I/O.  I also have Microport System V/AT that
I would like to run to use uucp when I am on the road with the Z161.

Is anyone aware of a plug in card that will make a PC/XT behave like at AT?
The ones I have seen are mostly just speed up cards that do not have the
CMOS configuration RAM or some of the other facilities that I think S V/AT
will be looking for.  I have no objection to gutting the 161, i.e. putting
in a new floppy controller for 1.2Mb drives (I already have a 32Mb hard card
in it) or making other necessary changes but I haven't run across a CPU card
that has on-board RAM and AT like resources that fits the old single connec-
tor backplane.  Please reply by email.  Thanks in advance,
-- 
Bill Kennedy  {cbosgd | ihnp4!petro | sun!texsun!rrm}!ssbn!bill