Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!ames!hc!hi!cyrus
From: cyrus@hi.UUCP (Tait Cyrus)
Newsgroups: comp.sys.nsc.32k
Subject: Re: NS32000 Processor
Message-ID: <8308@hi.UUCP>
Date: Tue, 9-Jun-87 15:37:01 EDT
Article-I.D.: hi.8308
Posted: Tue Jun  9 15:37:01 1987
Date-Received: Fri, 12-Jun-87 04:24:19 EDT
References: <266@udcps1.UUCP> <8252@hi.UUCP> <4517@hc.DSPO.GOV>
Reply-To: cyrus@hc.dspo.gov (Tait Cyrus)
Organization: U. of New Mexico, Albuquerque/ Los Alamos National Laboratories
Lines: 34
Keywords: NS32000 Processor

In article <4517@hc.DSPO.GOV> morrison@hc.DSPO.GOV (Bill Morrison) writes:
>> Here at the University of New Mexico, we are building a 5th order 
>> hypercube (32 node) using the 32032 and 32016.  Each node will contain
>> the following:
>> 
>Here at Los Alamos National Lab we are proud to be the parts supplier
>for above project, whenever they need anything they call us up and we
>take care of it for them (glad we are of use).

Well, I have to apologize for not supplying the FULL facts.  The 
hypercube that is being built is a joint project between Los Alamos
National Laboratories and the University of New Mexico.  Although
a fair amount of the current work is being done at the U., a lot
of the initial development was done at LANL.  Currently a lot of help,
in the way of parts and man power, has been supplied, and is still
being supplied, by LANL.

Again, I apologize for not giving 'everyone' credit for this very
interesting and revolutionary project :^).  Hopefully, full credit
has been awarded to ALL involved.

                          up
Again, sorry for the slip

-- 
    @__________@    W. Tait Cyrus   (505) 277-0806
   /|         /|    University of New Mexico
  / |        / |    Dept of EECE - Hypercube Project
 @__|_______@  |    Albuquerque, New Mexico 87131
 |  |       |  |
 |  |  hc   |  |    e-mail:
 |  @.......|..@       cyrus@hc.dspo.gov or cyrus@hc.arpa or
 | /        | /        {gatech|ucbvax|convex}!unmvax!hi!cyrus
 @/_________@Li