Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!topaz.rutgers.edu!wchao
From: wchao@topaz.rutgers.edu.UUCP
Newsgroups: comp.sys.tandy
Subject: Re: Double-sided disk for LDOS 5.3
Message-ID: <12674@topaz.rutgers.edu>
Date: Sun, 14-Jun-87 15:16:05 EDT
Article-I.D.: topaz.12674
Posted: Sun Jun 14 15:16:05 1987
Date-Received: Sun, 14-Jun-87 23:35:44 EDT
References: <12082@topaz.rutgers.edu> <5337@robin.cs.nott.ac.uk>
Organization: Rutgers Univ., New Brunswick, N.J.
Lines: 11
Keywords: LDOS 5.3, Model III


  The correct way of generating a double-sided LDOS 5.3 boot-disk
is first format the disk using SIDES=2 option. then issue the
command: BACKUP SYS0/SYS:s :d (SYS)  and this will properly
put the SYS0/SYS file on the front side of the disk, now
do a full disk backup using BACKUP :s :d (SYS,INV).
  This is the way Roy Soltoff said to use in issue 3 of TMQ.

William Chao
wchao@topaz.rutgers.edu
seismo!rutgers!topaz!wchao