Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!tj
From: tj@utgpu.UUCP
Newsgroups: ont.general,ut.general,comp.sys.ibm.pc
Subject: Dead IBM cards wanted
Message-ID: <1987Jun24.083946.17912@gpu.utcs.toronto.edu>
Date: Wed, 24-Jun-87 08:39:46 EDT
Article-I.D.: gpu.1987Jun24.083946.17912
Posted: Wed Jun 24 08:39:46 1987
Date-Received: Thu, 25-Jun-87 07:13:02 EDT
Distribution: can
Organization: University of Toronto Computing Services
Lines: 15
Xref: utgpu ont.general:354 ut.general:180 comp.sys.ibm.pc:4346
Checksum: 08264

I know you must have some... That floppy controller that failed and isn't
worth fixing since a new one is $50 now. The memory expansion that has
parity errors. The parallel port that you plugged a serial device into and
vapourized some traces on the board...

If you don't want them I do. I want to have a go at fixing some of these 
things, but I don't want to have to break my own to fix them!!
Drop me a note.

Thanks in advance.
Terry Jones
tj@utoronto (BITNET)
tj@gpu.utcs (uucp)
214 College St. Rm 308, Toronto
416-978-4924 (w) 416-267-9325 (H)